gdp's Comments

Autodesk Inventor and iLogic Tutorials : Square Holes In Autodesk Inventor?

Fri, 27 Feb 2015 16:53:42 +0000

I am currently working on a new set of free tutorials that will be posted on our commercial website http://applieddesignintelligence.com/. We are in the process of updating the site right now, so when the site does update, you will be able to request tutorials and/or code right on that website. This website is rarely checked and not updated.

Autodesk Inventor and iLogic Tutorials : Design Automation for Structural Steel

Fri, 27 Feb 2015 16:51:15 +0000

Autodesk Inventor and iLogic Tutorials : iLogic Code for Creating Min/Max Design Limits in Autodesk Inventor – 3

Fri, 27 Feb 2015 16:49:54 +0000

I am currently working on a new set of free tutorials that will be posted on our commercial website http://applieddesignintelligence.com/. We are in the process of updating the site right now, so when the site does update, you will be able to request tutorials right on that website. This website is rarely checked and not updated.

Autodesk Inventor and iLogic Tutorials : Inventor iLogic Assembly Automation Tutorial Decoded

Fri, 27 Feb 2015 16:47:52 +0000

I am currently working on a new set of free tutorials that will be posted on our commercial website http://applieddesignintelligence.com/. We are in the process of updating the site right now, so when the site does update, you will be able to request tutorials right on that website. This website is rarely checked and not updated.

Autodesk Inventor and iLogic Tutorials : Wooden Vanity Sink - True Environmentalism In Action

Fri, 27 Feb 2015 16:42:31 +0000

The sink does get wet, but the water does not get into the wood. Water would have to sit in the sink for days, and even then it is not likely to penetrate.

Autodesk Inventor and iLogic Tutorials : iLogic Tutorial for Creating a Woodworking Cutlist 2

Fri, 27 Feb 2015 16:39:53 +0000

Yes there is but the procedure is a bit lengthy to describe. I am currently working on a new set of free tutorials that will be posted on our commercial website http://applieddesignintelligence.com/. We are in the process of updating the site right now, so when the site does update, you will be able to request tutorials right on that website. This website is rarely checked and not updated.

Autodesk Inventor and iLogic Tutorials : Cloud Configurator at Autodesk University

Wed, 29 Jan 2014 14:35:07 +0000

Thanks Jeremy. The old site just got too ancient and blew up. It took three days (40 or so hours) to fix things! Hope to start adding some new stuff soon...

Autodesk Inventor and iLogic Tutorials : Autodesk Inventor's Projected Loop Error - A Workaround

Thu, 11 Jul 2013 14:24:40 +0000

I use a 3D Connexion’s SpacePilot Pro along with a logitech wireless mouse. Its the only way to do CAD. http://opendesignproject.org/2012/01/28/review-of... http://opendesignproject.org/2012/03/18/spacepilo... Mark Randa

Autodesk Inventor and iLogic Tutorials : Revit Interoperability in Inventor 2014!

Thu, 4 Jul 2013 11:35:42 +0000

I am not sure. I do not have access to an earlier version. Hopefully an Autodesk Employee or reseller will chime in. Mark Randa

Autodesk Inventor and iLogic Tutorials : How-To Create Templates in Autodesk Inventor

Sat, 8 Jun 2013 11:06:08 +0000

No, at least not with templates. Templates are not associative. You can do so using derived FX parts. Since this article was written, I have moved to a different workflow because most of my modeling is done to create iLogic configurators these days. With the new workflow, what you are looking for is quite possible. Mark

Autodesk Inventor and iLogic Tutorials : Inventor Tutorial for the iDoor – 21

Tue, 28 May 2013 23:19:34 +0000

Hi Justin, Not sure why the cope failed, but it's likely something simple --it seems it's never the complicated stuff that gets yo hung up :) I don't know of anything that would be too different in the different versions that would hang you up. 2013 is definitely more stable than 2010. If you can describe what is hanging you up, maybe I can help. Mark Randa

Autodesk Inventor and iLogic Tutorials : Inventor Tutorial for the iDoor – Introduction

Thu, 23 May 2013 15:51:33 +0000

The video is old, and YouTube didn't allow as high a definition back then. The movement is done with my 3D mouse, a 3D Connexion SpacePilot Pro: http://opendesignproject.org/2012/01/28/review-of...

Autodesk Inventor and iLogic Tutorials : Revit Interoperability in Inventor 2014!

Tue, 30 Apr 2013 12:19:07 +0000

Hi Jeanie, You are welcome! I will be posting something likely tonight or tomorrow. If there are any Architects out there that use Revit and purchase commercial cabinetry, I would love to hear from them to possibly bounce some BIM workflows off of them --or at least gauge their interest in various scenarios as to how they would gather bids, etc. At any rate, thanks for stopping by, and keep an eye on our commercial site as well: http://applieddesignintelligence.com/ We may be posting mostly there. Have a great day! Mark Randa

Autodesk Inventor and iLogic Tutorials : The Autodesk Inventor Default Setting From Hell

Sat, 16 Mar 2013 13:50:50 +0000

Autodesk Inventor is by far the best furniture design software. That's the way to go.

Autodesk Inventor and iLogic Tutorials : Automated Cabinetmaking Design Tutorial – Extruding The Face Frame

Thu, 21 Feb 2013 01:44:30 +0000

When multi-solid bodies first came out, I would have success one time, and then failure another, and thought i was going crazy or the program was broken!!!!!!!!!!!!!! But no. Just very fussy about the order of things, and in the end it needs to be that way. glad you worked it out. nwe stuff coming up very soon. Mark Randa

Autodesk Inventor and iLogic Tutorials : Inventor Tutorial for Designing a Shaker Table - 2 - Sketching Stuff

Tue, 29 Jan 2013 14:54:43 +0000

Ummmmm....... Sorry, but your comment wasn't clear enough. What instructions were not clear enough? What "wording" are you speaking of?

Autodesk Inventor and iLogic Tutorials : The Autodesk Inventor Default Setting From Hell

Thu, 24 Jan 2013 15:02:39 +0000

Well, you get what you play for. good luck with that...

Autodesk Inventor and iLogic Tutorials : Designing the Perfect Cabinetmaking Program

Mon, 14 Jan 2013 14:21:33 +0000

Was the course in Inventor? Mark

Autodesk Inventor and iLogic Tutorials : ERP Cabinetmaking Design Tutorial – iLogic Code for the Face Frame

Fri, 11 Jan 2013 12:17:44 +0000

Yea, I know it's been a long time, but I have a ton of stuff on my plate at the moment. I will do my best though --maybe short posts. As they are, they cam take the better part of a day. It will happen though! Mark

Autodesk Inventor and iLogic Tutorials : Inventor Tutorial – Layout Part Creation - Side Elevation - 4

Thu, 10 Jan 2013 13:18:08 +0000

What software were you looking for?